LTC2686 Datasheet | Analog Devices

Data Sheet LTC2686 8-Channel, 12-/16-Bit Voltage Output Soft Span DAC Features - Eight independent Soft Span DAC channels - Independently programmable output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, ±10 V, ±15 V - Full 12-/16-bit resolution at all ranges - Flexible single- or dual-supply operation - Maximum INL error: ±3 LSB (LTC2686-16), ±0.75 LSB (LTC2686-12) - Precision 4.096 V reference, ±10 ppm/°C maximum - A/B toggle or sinusoidal dither using up to 3 toggle pins - Multiplexer for output voltage and load current sense - Outputs drive ±55 m A guaranteed - 6 mm × 6 mm, 40-lead LFCSP - 4.5 mm × 4.5 mm, 64-ball WLCSP APPLICATIONS - Optical networking - Instrumentation - Data acquisition - Automatic test equipment - Process control and industrial automation FUNCTIONAL BLOCK DIAGRAM Figure 1. GENERAL DESCRIPTION The LTC2686 is an 8-channel, 12-/16-bit, ±15 V digital-to-analog converter (DAC) with an integrated precision reference. The LTC2686 is guaranteed monotonic and has built in rail-to-rail output buffers that can source or sink up to 55 m A. This Soft Span™ DAC offers five output ranges up to ±15 V. The range of each channel is independently programmable. The internal 4.096 V precision reference sets the accuracy of the output voltage. An external reference can be used for additional range options. Three toggle pins support Input Register A and Input Register B toggle or sinusoidal dither at multiple frequencies. An analog multiplexer simplifies measurement of pin voltages, load currents, and junction temperature. Programmable offset and gain registers improve the accuracy of the DAC outputs. The serial peripheral interface (SPI) and MICROWIRE™-patible, 3-wire serial interface operates on logic levels as low as 1.71 V and clock rates up to 50 MHz. Rev. A DOCUMENT FEEDBACK TECHNICAL SUPPORT Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog Devices for its use, nor for any...